Our optic cuts include Full-Length Recoil Lugs to secure the optic as designed for better optic life and performance..
All of our cuts use full lugs to provide the best optic interface for competitive high-round count use.
The SRO cut is compatible with Holosun 507 Comp, however, the deck in front for the optic is cut down to make room for the SRO overhang.
For the Cleanest look select the step cut option for your Holosun C/Comp Optic or RMR Type 2 but will not be compatible with the SRO (Can always add step cut later. but you can't take it away:)
This product includes the Optic Cut only. We provide a black oxide tool finish on the cut area.
Screws for the Trijicon are provided but for Holosun you must use their provided long screws provided with the optic (screw head diameter is smaller).
You can send in your small parts with the slide minus the barrel and recoil assembly. We will return your irons to you with the slide.
You can provide your own optic, and we are more than happy to install it for you using Permatex Orange and torqued to spec. Your optic is not required as we cut the slide to fit the optic by the lugs.
You are responsible for shipping the slide to us after placing the order. Please include your order number with the package and secure pack and send the slide (flat rate USPS is a great option).
The address is in our Slide Milling FAQ Section
You can select Fed Ex Ground Label and we will email you a label by the next business day. We are not responsible for items lost in transit.
We return all slides via USPS signature is required on delivery unless FedEx Options are selected.
Please add any additional instructions
For shipping instructions please read our FAQ
CLICK TO READ OUR FAQ HERE
