Stonebridge Gunworks CZ Optic Cut • MILLCZTACSPORT2
CZ Tactical Sport 2 Direct Optic Cut
Direct-mill your CZ Tactical Sport 2 slide for a competition-focused red dot setup. This Stonebridge Gunworks optic cut service is designed for TS2 shooters who want a lower, stronger optic mounting interface with full-length recoil lugs, clean slide fitment, and optic-specific screw support.
This service includes the optic cut only for your CZ Tactical Sport 2 slide. No slide, optic, barrel, recoil assembly, or complete firearm is included unless purchased or arranged separately.
Service Type
Direct optic cut / slide milling
Platform
CZ Tactical Sport 2 and TS2 Orange slides
Part Number
MILLCZTACSPORT2
Cut Design
Full-length recoil lugs for a secure optic interface
Finish
Black oxide tool finish on the machined cut area
Best Use
USPSA, Limited Optics, practical shooting, and range competition builds
Important: This is a slide milling service for your CZ Tactical Sport 2 slide. Send the slide only. Do not send the barrel or recoil assembly for this optic cut unless Stonebridge Gunworks specifically instructs you otherwise.
Choose the Right Optic Cut
Select the optic cut based on the red dot you plan to use. The optic footprint determines the slide cut, recoil lug fit, screw setup, and future optic compatibility.
| Optic Cut Option |
Best For |
Important Compatibility Note |
| SRO / RMR / Holosun C-Series / Holosun Comp with Step Cut |
Trijicon SRO users and shooters who want future SRO compatibility |
The step cut clears the SRO overhang. It is compatible with Holosun 407 Comp and 507 Comp, but the front deck is relieved for SRO clearance.
|
| Holosun C / Holosun Comp / RMR with No Step Cut |
Holosun 407C, 507C, 407 Comp, 507 Comp, and RMR-style setups where the cleanest look is preferred |
This is the cleaner-looking option for Holosun C/Comp and RMR users, but it is not compatible with the Trijicon SRO unless the step cut is added later.
|
| DeltaPoint Pro / Vortex Defender ST |
Leupold DeltaPoint Pro and Vortex Defender ST users |
This cut is not compatible with the Vortex Defender XL.
|
| Vortex Defender XL with Step Cut |
Vortex Defender XL competition optic users |
Select this option for Defender XL-specific slide work.
|
Optic selection tip: Choose the red dot before ordering the cut. If you are deciding between the Trijicon SRO and Holosun 507 Comp, the SRO-compatible step cut gives you more future flexibility, while the no-step Holosun/RMR cut gives the cleaner front-deck appearance.
What This CZ TS2 Optic Cut Includes
- Direct slide milling: Your CZ Tactical Sport 2 slide is cut directly for the selected optic footprint.
- Full-length recoil lugs: The cut uses full lugs to help secure the optic as designed for high-round-count competition use.
- Black oxide cut-area finish: The machined cut area receives black oxide tool finish. This is not a full slide refinish.
- Optic-specific screw support: Trijicon and Holosun screw sets are provided for the listed cuts. Vortex Defender and Defender XL cuts use the Glock MOS M4 screws supplied with the Vortex optic.
- Optional optic installation: You may provide your own optic or purchase a red dot with the order for installation.
- Optional front sight blank: Available for compatible standard TS2 pinned-bushing models when selected above. Not compatible with the TS2 Orange bull barrel model.
TS2, TS2 Orange, TSO, and Other CZ Fitment Notes
Use this listing for CZ Tactical Sport 2 and TS2 Orange optic cuts. If you are not sure whether your pistol is a Tactical Sport 1, Tactical Sport Orange, Tactical Sport 2, TS2 Orange, or Shadow 2, confirm the model before ordering.
| CZ Model / Slide |
Use This Listing? |
Correct Buying Path |
| CZ Tactical Sport 2 |
Yes |
Use this CZ Tactical Sport 2 Direct Optic Cut service. Standard TS2 pinned-bushing models may use the front sight blank option when selected. |
| CZ Tactical Sport 2 Orange |
Yes |
Use this TS2 service. The TS2 Orange uses a bull barrel and does not have the pinned bushing setup, so the front sight blank option is not compatible. |
| Original CZ Tactical Sport / TSO / Tactical Sport 1 |
No |
Use the Tactical Sport 1 optic cut service instead.
View CZ Tactical Sport 1 Optic Cut.
|
| CZ Shadow 2 |
No |
Use the CZ Shadow 2 optic cut service.
View CZ Shadow 2 Optic Cut.
|
| CZ P-10 |
No |
Use the CZ P-10 optic cut service.
View CZ P-10 Optic Cut.
|
Front Sight Blank and Barrel Style Notes
The front sight blank option depends on the exact TS2 slide and barrel configuration. Standard CZ Tactical Sport 2 models with a pinned front bushing setup may use the front sight blank option. The TS2 Orange uses a bull barrel and does not have the pinned bushing setup, so the front sight blank option is not compatible with the TS2 Orange.
Standard TS2 With Pinned Bushing
If your CZ Tactical Sport 2 has the pinned front bushing setup, Stonebridge Gunworks can replace the front sight with a new front sight blank when that option is selected.
TS2 Orange Bull Barrel
The CZ Tactical Sport 2 Orange uses a bull barrel and does not use the pinned front bushing setup. Because of that, the front sight blank option is not compatible with the TS2 Orange.
Checkout Comments
Add any special sight, optic installation, or front sight return instructions in the checkout comments so the shop has them with your order.
How to Order This CZ Tactical Sport 2 Optic Cut
1
Choose Your Optic Cut
Select the footprint that matches your red dot. Choose the SRO-compatible step cut if you want SRO clearance or future SRO compatibility.
2
Select Sight and Red Dot Options
Choose whether your slide is eligible for a front sight blank and whether you are sending, supplying, or buying a red dot with the order.
3
Pick Return Shipping
Select return shipping and carrier insurance options before adding the service to your cart.
4
Ship the Slide
After checkout, securely pack and ship your slide. Include your order number in the package.
Shipping help: For current lead-time, address, packaging, and slide milling instructions, read the Stonebridge Gunworks Slide Milling FAQ before shipping.
Read the Slide Milling FAQ.
What to Send With Your Slide
- Place your order before shipping the slide.
- Include your order number inside the package.
- Send the slide only for this optic cut service.
- Do not send the barrel or recoil assembly.
- Small slide parts may remain installed unless Stonebridge Gunworks instructs otherwise.
- If you are providing an optic for installation, include the optic and any required Vortex Defender / Defender XL MOS M4 screws when applicable.
- Add special instructions in the checkout comments before completing the order.
A direct optic cut is usually the first decision in a CZ Tactical Sport 2 competition build. Once the optic footprint is selected, supporting parts such as a compatible red dot, magazine extension, and training tool can be selected around the same match-use setup.
Red Dot Pairing
Shop Compatible Red Dots
Choose your optic before ordering the slide cut. Common competition choices include Holosun 407 Comp, Holosun 507 Comp, Trijicon SRO, Vortex Defender ST, and Vortex Defender XL.
- Large-window competition optics
- Available red dot add-ons on the product page
- Choose footprint before milling
Shop Red Dot Optics
Magazine Setup
Henning CZ Tactical Sport Magazine Extension
Pair your TS2 optic cut with a Henning Tactical Sport magazine extension for a competition-oriented magazine setup. Add the MBX follower and spring kit when maximum capacity is preferred and slide lock-back is not needed.
- Designed for CZ Tactical Sport magazines
- Plus 3 to 4 round capacity increase
- Made for USPSA 141.25mm gauge setups
Shop CZ Tactical Sport Extension
Wrong CZ Model?
Other CZ Optic Cut Services
If you have a CZ Shadow 2, CZ P-10, original Tactical Sport, or Tactical Sport Orange, choose the correct CZ slide milling service before ordering.
- CZ Shadow 2 optic cuts
- CZ P-10 optic cuts
- CZ Tactical Sport 1 optic cuts
View All CZ Services
All Pistol Optic Cut Services
Training Support
SBGW Target Focus Trainers
Add an optic-specific Target Focus Trainer to support dry fire, live fire, and occlusion-style red dot training with the optic mounted on your TS2.
- Useful for red dot presentation work
- Supports target-focused training
- Available for popular competition optics
Shop TFT Trainers
Build Path: Optic Cut, Red Dot, Magazines, and Training
USPSA / Limited Optics TS2
Start with the red dot you want to compete with, then order the direct optic cut that matches that footprint. Add the Tactical Sport magazine extension after confirming your division and gauge requirements.
Shop Tactical Sport magazine extensions
Range / Competition Training Build
Pair the optic cut with a large-window competition red dot such as a Holosun Comp, Trijicon SRO, or Defender XL, then use the same optic during dry fire and live fire practice.
Compare red dot optics
Cleanest Optic Fit
For Holosun C/Comp and RMR-style optics, choose the no-step cut if you want the cleanest front-deck appearance and do not need SRO compatibility.
Read the red dot comparison guide
Frequently Asked Questions
What CZ pistol is this optic cut for?
This service is for CZ Tactical Sport 2 and TS2 Orange slides. If you have an original Tactical Sport, Tactical Sport Orange, Shadow 2, or P-10, use the correct model-specific optic cut instead.
Is the TS2 Orange compatible with the front sight blank option?
No. The CZ Tactical Sport 2 Orange uses a bull barrel and does not have the pinned bushing setup, so the front sight blank option is not compatible with the TS2 Orange.
Which TS2 models can use the front sight blank option?
Standard CZ Tactical Sport 2 models with the pinned front bushing setup may use the front sight blank option when selected above.
Is the optic included?
No. This service includes the optic cut only. You may provide your own optic, choose an available red dot add-on, or purchase a compatible optic separately.
Do I need to send my optic?
The optic is not required because the slide is cut to the optic footprint and recoil lugs. If you send your optic or buy one with the order, Stonebridge Gunworks can install it.
Should I choose the SRO step cut or the no-step Holosun/RMR cut?
Choose the SRO-compatible step cut if you plan to run a Trijicon SRO or want future SRO compatibility. Choose the no-step Holosun/RMR cut if you are running a Holosun C-Series, Holosun Comp, or RMR-style optic and want the cleanest appearance without SRO compatibility.
Can the step cut be added later?
Yes, the step cut can be added later if you decide to move from a no-step Holosun/RMR-style cut to an SRO-compatible setup. The step cut cannot be removed once added.
What finish is applied after milling?
The machined cut area receives black oxide tool finish. This is not a full slide refinish.
Should I send the barrel or recoil assembly?
No. For this optic cut service, send the slide without the barrel or recoil assembly unless Stonebridge Gunworks specifically instructs you otherwise.
What screws are used?
Trijicon and Holosun screw sets are provided for the listed cuts. Vortex Defender and Defender XL optics use the Glock MOS M4 screws supplied with the Vortex optic, so include those screws if Stonebridge Gunworks is mounting the optic.
Is Stonebridge Gunworks affiliated with CZ?
No. CZ, CZ-USA, Tactical Sport, Tactical Sport 2, Shadow 2, and related names are used only to identify compatible pistols, slides, parts, and services. Stonebridge Gunworks LLC is not affiliated with, endorsed by, or sponsored by CZ or CZ-USA.
