Reset Your Glock's Trigger Without Racking the Slide
Stonebridge Gunworks · Dry-Fire Training · Made in USA
Clip it on and the trigger resets itself — press after press, no racking the slide between reps. Easy to use, and cheap enough to keep spares in every range bag.
Fits
Glock Gen 5 (RC-105) · Gen 6 (RC-106)
Red dots
Clears slide-mounted optics
Color
High-visibility orange
Made in
USA by Stonebridge
Choose your options above. Pack: 4-Pack or Single (try one). Generation: Gen 5 Glock (RC-105) or Gen 6 Glock (RC-106). Make sure you have the right generation for your pistol before use.
| Pack | Price | Per clip |
|---|
| 4-Pack (same generation) | $24.95 | $6.24 |
| Single (try one) | $8.95 | $8.95 |
Dry fire only. This is not a safety device.
Verify the pistol is unloaded, get every round out of the room, and take the clip off before live fire — every time.
New to the ResetClip? Read the full instructions — checking the pistol, fitting it, taking it off and inspecting it. It is the same page the QR code on your label opens.
How It Works
The ResetClip seats over the rear of the slide and lets the trigger reset on its own, so you get press after press without racking the slide between reps. Nothing on the pistol is modified, and it comes off in a second.
It is bright orange on purpose: you can see from across the room that it is installed, you cannot miss it when it is time to take it off, and you can find it when it ends up on the floor of your range bag.
Which One Do I Need?
RC-105 fits Glock Gen 5. RC-106 fits Glock Gen 6. The Gen 6 version has longer arms. They are not interchangeable, and other generations have not been tested and are not supported. The clip must be fully seated once installed.
Law Enforcement & Agency Orders
Outfitting a department, academy or training unit? We offer multi-clip discounts for law enforcement and accept purchase orders. Contact us with the quantity and generation mix you need, and we will send a quote.
Specifications
| RC-105 | Fits Glock Gen 5 |
|---|
| RC-106 | Fits Glock Gen 6 (longer arms) |
|---|
| Red dots | Clears slide-mounted optics |
|---|
| Color | High-visibility orange |
|---|
| Packaging | Each clip individually bagged and labeled, with a QR code to the instructions |
|---|
| Made in | USA by Stonebridge Gunworks |
|---|
Warranty
If your ResetClip arrives cracked or defective, we will replace it free. After that it is a consumable part — you will lose it before you wear it out — and it is not covered against wear, loss or damage in use.
Frequently Asked Questions
Will the ResetClip work on a Gen 3 or Gen 4 Glock?
Not yet confirmed. The ResetClip is made and tested for Gen 5 (RC-105) and Gen 6 (RC-106) Glocks. We have not yet tested it on Gen 3 or Gen 4 pistols, so we cannot confirm fit on those generations.
Which Glock models does it fit?
The ResetClip fits the Glock 17, 19, 34, 45 and 47. Choose RC-105 for a Gen 5 pistol or RC-106 for a Gen 6 pistol.
Will it work with a red dot mounted on the slide?
Yes. The ResetClip clears slide-mounted optics, so you can dry fire with your red dot installed.
Do I need to rack the slide between trigger presses?
No. With the clip fitted, the trigger resets after each press, so you can run repeated dry-fire reps without racking the slide.
Is the ResetClip a safety device?
No. It is for dry fire only and is not a safety device. Verify that the pistol is unloaded, remove all ammunition from the room, and remove the clip before any live fire.
GLOCK® is a registered trademark of GLOCK, Inc. Stonebridge Gunworks LLC is not affiliated with, authorized by, sponsored by or endorsed by GLOCK, Inc. The ResetClip is designed and manufactured by Stonebridge Gunworks.
